How is the fastening of drywall to the wall

Hypsum plasterboard is mounted with a frameless way using glue applied to the entire perimeter of the material with special spatulas. But, at the beginning, the surface itself is completely cleaned. It is worth noting that this fixation method is most suitable for walls that have curvature at the base. Also, the surface should be protected from freezing and moisture. And in order to attach sheets of drywall to the wall, it is necessary to use the rule and rubber hammer.

The fastening of drywall to the wall is not a difficult process, but also quite expensive. Nevertheless, it is this method that will allow thermal insulation, t. e. improve their thermal characteristics. And it also has the functionality of the leveling of walls that already have a curvature. In this case, it is necessary to create a frame structure to which drywall sheets will be attached. For this, wooden bars or galvanized profiles are best suited.

Using this method, the fastening of drywall does not require preliminary thorough cleaning of the wall. First you need to take measurements around the entire perimeter of the surface. It is in their place that guide profiles will be attached. And with the help of a perforator, screws and dowels, the upper profile is attached, and then all the rest is already. And the drywall sheets themselves are installed using screws. To strengthen thermal characteristics, it is necessary to fill the space between the ceiling and the wall with insulation material – such as mineral wool.