The accuracy of the installation of buildings with compulsory fixation of the mounted, elements
In the domestic practice of large -panel housing construction, there is significant experience in using installation devices to exclude or significant reduction of subjective errors of breakdown and installation of panels in a design position.
The purpose of the application of such devices is to transfer to the construction site the same methods for ensuring the accuracy of the linear sizes of reinforced concrete products, which are sold in the manufacture of them in metal forms, when manufacturing errors are mainly determined by the errors of the forms and the influence of the “hand of the master” is excluded or reduced by the effect of.
As already noted above, when installing panels, there are three main sources of errors: breakdown of oriented wisdom on the floor platform for wall panels, transferring the basic axes from floor to floor and installing panels with oriented risks. Especially fraught with errors, the operation of combining panels with oriented risks
As already noted above, when installing panels, there are three main sources of errors: breakdown of oriented wisdom on the floor platform for wall panels, transferring the basic axes from floor to floor and installing panels with oriented risks. Especially fraught with errors, the operation of combining panels with oriented risks. The idea of eliminating detailed breakdowns of guidelines and combining wall panels with oriented risks is based on an accurate fixation of one motionless landmark, for example, panels of the transverse wall.
All other panels are strictly joined by the base panel or the guideline with fixators, and, therefore, the need for breakdown of oriented scorks and fixing the position of each individual panel disappears. In addition, there is no need for temporary binding mounts. All this can significantly accelerate the installation work and, most importantly, exclude individual errors in the breakdown of detailed installation (oriented) scorks and when combining mounted panels with them.